Total Battle Troop Stacking Tables by Leadership Cap

How to Read These Tables

All tables use the 1.9× multiplier standard with 3 shield tiers below the primary — the setup used by most competitive players.

  • Primary: Your highest-tier Guardsmen (the troops you’re protecting)
  • S1: Shield tier 1 (one tier below primary)
  • S2: Shield tier 2 (two tiers below primary)
  • S3: Shield tier 3 (three tiers below primary)

Sum factor for 3 shields: 13.369

Use the Total Battle Calculator to generate stacks for any leadership cap and tier automatically.


100,000 Leadership

Primary TierPrimaryS1S2S3Total Used
G67,48114,21427,00651,311100,012
G57,48114,21427,00651,311100,012
G47,48114,21427,00651,311100,012
G37,48114,21427,00651,311100,012

Note: troop counts are identical regardless of primary tier — the formula only cares about leadership cap and number of shield tiers. Tier identity affects power per troop, not count.


200,000 Leadership

ConfigPrimaryS1S2S3Total Used
3 shields, 1.9×14,96228,42854,013102,624200,027
2 shields, 1.9×30,72258,372110,906200,000
1 shield, 1.9×68,966131,035200,001

300,000 Leadership

ConfigPrimaryS1S2S3Total Used
3 shields, 1.9×22,44342,64281,019153,936300,040
2 shields, 1.9×46,08387,558166,359300,000
1 shield, 1.9×103,448196,552300,000

500,000 Leadership

ConfigPrimaryS1S2S3Total Used
3 shields, 1.9×37,40371,066135,025256,549500,043
2 shields, 1.9×76,805145,930277,266500,001
1 shield, 1.9×172,414327,587500,001

750,000 Leadership

ConfigPrimaryS1S2S3Total Used
3 shields, 1.9×56,104106,598202,535384,817750,054
2 shields, 1.9×115,207218,893415,897749,997

1,000,000 Leadership

ConfigPrimaryS1S2S3Total Used
3 shields, 1.9×74,807142,133270,053513,1011,000,094
2 shields, 1.9×153,609291,858554,530999,997
4 shields, 1.9×27,33751,94098,686187,503356,257*

*4-shield with 1M leadership: additional tier would be 356K G-tier troops, requiring another 677K to complete — use for specific garrison setups only.


1,500,000 Leadership

ConfigPrimaryS1S2S3Total Used
3 shields, 1.9×112,211213,201405,082769,6211,500,115

2,000,000 Leadership

ConfigPrimaryS1S2S3Total Used
3 shields, 1.9×149,614284,267540,1071,026,2072,000,195
4 shields, 1.9×54,673103,879197,370374,903730,825*

*With 4 shields + 2M leadership: Primary=54,673, S1=103,879, S2=197,370, S3=374,903, S4=712,315. Total≈1,443,140. Remaining 556,860 can fill another tier.


Two-Shield Stack Reference (All Leadership Caps)

For players who lack enough lower-tier troops for 3 shields, a 2-shield stack is still significantly better than no stacking.

Sum factor for 2 shields: 1 + 1.9 + 3.61 = 6.51

LeadershipPrimaryS1S2Total Used
100K15,36129,18655,453100,000
200K30,72258,372110,906200,000
300K46,08387,558166,360300,001
500K76,805145,930277,266500,001
750K115,207218,893415,897749,997
1M153,610291,859554,5321,000,001
1.5M230,414437,787831,7951,499,996
2M307,219583,7161,109,0621,999,997

Effective HP Comparison: Stacked vs Unstacked

To illustrate the value of stacking, assume G6=100 HP/unit, G5=80 HP, G4=60 HP, G3=40 HP:

500K Leadership, G6 only (unstacked):

G6 × 500,000 = 50,000,000 total HP

500K Leadership, G6 primary + 3 shields (stacked):

G6 × 37,403 @ 100 HP  =  3,740,300
G5 × 71,066 @ 80 HP   =  5,685,280
G4 × 135,025 @ 60 HP  =  8,101,500
G3 × 256,549 @ 40 HP  = 10,261,960

Total effective HP     = 27,789,040

A stacked army has 27.8M effective HP vs 50M for an unstacked G6 army — but the stacked version protects its G6 primary troops completely until all shields die. The G6 core absorbs no damage until 256,549 + 135,025 + 71,066 = 462,640 troops are killed first.

The unstacked G6 army starts losing its valuable troops from the very first hit.


Next Steps

Once you know your target troop counts:

  1. Compare to what you currently have trained
  2. Prioritize training the deficit tier (usually primary and first shield tier first)
  3. Recheck your counts every time your leadership cap increases

For detailed guidance on applying these numbers to a march, see the Troop Stack Building Guide.

References & Sources

  1. [1] TBattle.Wiki — Troop Stacking (opens in new tab)
  2. [2] Total Battle Calculator Tools (opens in new tab)